Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Colwyn
If your chimney is shedding mortar, showing white bloom on the brick, or letting water in around the flashing, you’re probably wondering who to call and what it will actually run. Chimney repair in Colwyn typically costs $275 to $900 for repointing and flashing work, and climbs into the $1,800 to $6,500 range when a crown rebuild or a section of stack has to come down and go back up. We work on the older brick stacks you find throughout Colwyn, and our technicians have up to 13 years of experience. Call (833) 432-4886. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Colwyn Homeowners Call Chimney Sweep Fishtown for Chimney Repair
Much of the borough was built between 1890 and 1930 as small attached rows and twins, and that changes how chimney work goes here. A single brick stack often carries two flues, one for your house and one for the property next door. We inspect the whole stack, not just the side we’re standing on, because a repair scoped from one address can miss a cracked tile or a backdrafting appliance on the other side of the party wall.
We serve homeowners across Colwyn, and we know the tight-alley roof access that comes with these blocks. Getting a ladder and a camera up to a mid-terrace stack is a planning job, and we plan it with the adjoining owner rather than around them. Every recommendation comes with photos and camera footage you can look at yourself, so you’re never asked to take our word for masonry you can’t see. The local pro who does the work is licensed and insured as their state requires, and you get a flat price agreed before anything is booked.
Our full-scope service is the other reason people call. From sweep to rebuild, one company handles the chimney repair, the liner inside it, and the cap on top, so you don’t end up managing two contractors who each blame the other for a leak.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Colwyn
Mortar Repointing
Cold winters and humid summers in this part of Delaware County open mortar joints faster than most homeowners expect. Freeze-thaw cycling pushes joints apart, and once they’re open, water gets behind the brick. We grind out the failed mortar to a proper depth and repack it with a mix matched to the original, which matters on 1890s and 1900s brick that was never meant to take a hard modern mortar.

Spalling Brick Repair
That white chalky bloom on your chimney is efflorescence, and where the brick faces have already popped off, that’s spalling. It usually traces back to a failed crown or uncapped flue letting water soak into the masonry. We replace the blown brick, address the moisture source, and check the flues on both sides of a shared stack before we call the job done.

Chimney Waterproofing
A breathable masonry water repellent stops liquid water from entering the brick while letting trapped vapor escape, which is the part most sealants get wrong. On Colwyn’s older brick, a film-forming sealer can trap moisture and make spalling worse. We match the treatment to the masonry and re-check the crown and flashing first, because waterproofing over a leak just moves the problem.

Flashing Repair
Flashing is where most roof leaks around a chimney start. On the low-pitch roofs and tight roof-to-roof junctions common in the dense rows here, step flashing gets bent, lifted, or tarred over by someone in a hurry. We rebuild the flashing in proper metal, tie it correctly into the roof covering, and seal the counterflashing at the masonry.
Trusted Brands We Service in Colwyn
When a repair turns into a liner or resurfacing job, we name the materials so you can research them yourself. For older flues where a rigid liner won’t fit, we use DuraFlex flexible liner systems. For restoring a damaged clay tile liner without tearing it out, we apply HeatShield ceramic resurfacing, a proprietary system that takes specific product training. Caps and covers come from Famco and Gelco, the brands professionals specify rather than hardware-store substitutes. Chimney components are sourced through Copperfield, the professional distributor trusted by certified sweeps nationwide. We don’t claim to stock parts locally; we spec the right product for your flue and schedule the work.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Colwyn Homes
- A neighbor’s appliance venting into your stack. Plenty of these attached homes have a furnace or water heater tied into the same party-wall chimney, so a repair scoped from one address can miss a cross-contaminated flue serving the other side.
- Cracked original clay tile liners. The liners installed in the 1890 – 1930 build-out are now spalling and cracked, letting flue gases and moisture migrate into adjacent masonry and into the neighbor’s half of the stack.
- Summer rain into uncapped flues. Water gets in through an open flue or an unsound crown, and the trapped moisture spalls brick faces and pops mortar joints already softened by hardened creosote and humid air.
- Hard creosote that’s turned glassy. Cold snaps harden creosote into a glaze that’s hard to sweep and a real fire risk. Annual inspections catch it before it becomes a repair.
Pricing for Chimney Repair in Colwyn, PA
Repair pricing here reflects the housing: small stacks, shared components, and roof access through a tight alley. A typical mortar repointing in Colwyn runs $275 to $900, depending on how much of the stack is accessible and how many joints have failed. Spalling brick repair is usually $400 to $1,200. Chimney waterproofing runs $250 to $550. Flashing repair lands around $300 to $850. A crown rebuild sits at $600 to $1,500, and a partial chimney rebuild can run $1,800 to $6,500 when the top courses have to come down. These are estimates; the written estimate sets the final price. The estimate itself is free, and it’s per job, not per hour.
We Also Serve Cities Near Colwyn
We handle chimney repair in the towns around the borough too, including Sharon Hill, Collingdale, Aldan and Clifton Heights. The housing stock and the party-wall stacks carry across the line, so the approach doesn’t change much. If you’re just outside Colwyn and not sure whether you’re in our area, call and we’ll tell you straight.
Serving Colwyn, PA – Our Local Coverage Area
We serve Colwyn and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Colwyn
The adjoining owners usually split the cost of work to the shared stack, and the repair should be scoped by inspecting both flues before anyone quotes. We camera both sides, document what we find, and give you photos you can share with your neighbor so the conversation starts from evidence instead of guesswork. Call (833) 432-4886. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Spalling is almost always a moisture problem on the outside of the chimney, not a flue problem on the inside. A failed crown, a missing cap, or flashing that’s let go lets water into the brick, and freeze-thaw across Delaware County winters pops the faces off. The flue can be perfectly sound while the masonry around it crumbles. Call (833) 432-4886 for an exact quote; estimates are free.
First-degree creosote is the light, sooty, flaky layer a routine sweep removes with a brush. Second-degree is a flaky, hardened crust, and third-degree is a glazed, tar-like coating that clings to the flue and won’t brush off. Third-degree deposits are what push a job from a sweep into a repair or a liner resurfacing. Call (833) 432-4886 and we’ll tell you which one you’re dealing with.
Yes. That’s the core risk in these party-wall stacks. A cracked tile on one side lets flue gases and moisture cross into the masonry and into the neighbor’s flue, and a pressure imbalance can pull smoke the wrong way. It’s exactly why a repair on an attached home has to be scoped from both addresses. Call (833) 432-4886 to get both flues inspected.
Yes, and the reason isn’t creosote in your case. On an uncapped or poorly capped flue, the main threat is water, and Colwyn’s humid summers plus freezing winters are what drive liner deterioration and spalling. An annual inspection catches a failed crown or a cracked tile before it turns into a rebuild. Call (833) 432-4886 for an exact quote on an inspection; estimates are free.
If your chimney is showing its age, call (833) 432-4886 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and the price is set per job by the written estimate.
Written by the team at Chimney Sweep Fishtown.