Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Clifton Heights
If your chimney crown is cracked or the cap has rusted through, a repair in Clifton Heights usually runs $145 – $680 depending on whether we’re coating, rebuilding, or replacing. We work the dense rowhouse blocks along Springfield Road and Baltimore Pike, and we know what those stacks look like up close: two flues in one chase, shared party walls, and original masonry that has taken a century of freeze-thaw. That changes how a cap and crown job gets planned here. Call (833) 432-4886. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Clifton Heights Homeowners Call Chimney Sweep Fishtown for Chimney Cap & Crown
We’re a chimney and fireplace specialist, not a general handyman outfit, and that matters most on the attached housing common in Clifton Heights. Our technicians have up to 13 years of experience reading old masonry, sorting out which flue serves which appliance, and installing caps that fit a paired-flue opening rather than a hardware-store stock size. When you book, the flat price for the sweep is agreed before we head out, and any recommendation comes with camera photos you can look at yourself.
Clifton Heights sits in the 19018 area between Upper Darby and Lansdowne, and the housing stock is tight, walkable, and old. Most of these units predate 1950, so we’re working on terra-cotta liners and original crowns far more often than on modern factory-built systems. That’s a different set of problems, and it’s what we do. We serve Clifton Heights and the surrounding Delaware County boroughs with the same full-scope approach: chimney cap & crown work, liners, rebuilds, and fireplace repair.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Clifton Heights
Cap Installation
We install stainless caps sized to the actual flue opening, not the nearest stock size. On Clifton Heights twins and rowhouses, the opening is frequently a pair, so we measure both flues and confirm the assignment before installing anything. Proper fit is what keeps rain, birds, and squirrels out of the flue year after year.

Cap Replacement
An old cap that has rusted, warped, or lost its mesh does nothing for your chimney. When we replace one in Clifton Heights, we check the crown and flashing at the same time, since a failing cap is often the first visible sign of a bigger water problem. Replacing a rusted cap typically runs $145 – $385.

Crown Repair
The crown is the concrete or mortar top of the stack, and on early-1900s masonry in Clifton Heights it’s the most common source of water intrusion. We rebuild failed crowns with the correct slope and overhang so water sheds away from the flue instead of running down inside it. Repairs usually run $275 – $680.

Crown Coating
Where the crown is intact but hairline-cracked, a proper coating seals it before water gets in and does the kind of slow damage that freeze-thaw accelerates. We use professional-grade products, not a paint-over. Coating typically runs $185 – $420.
Multi-Flue Cap
This is the service most Clifton Heights attached homes actually need: a single cap covering both flues in a shared chase. It protects the neighbor’s flue as well as yours, and it’s the right answer when the two openings sit inches apart under one stack.
Custom Cap
Standard caps don’t fit every stack, and the paired openings in Clifton Heights’s party-wall chimneys are a good example. We fabricate to measure so the cap covers both flue openings correctly and fastens securely to a shared crown.
Trusted Brands We Service in Clifton Heights
We work with professional-grade parts and we name them, so you can look them up yourself. Gelco and Famco caps and covers, Olympia Chimney stainless components, and Copperfield-sourced materials are what we install on Clifton Heights chimneys because they hold up to the local weather better than the thin galvanized caps sold in box stores. Custom and multi-flue work is measured on arrival, so we fit the actual opening rather than guessing. We don’t stock parts locally, but installs come together on a normal schedule once measurements are confirmed.
Common Chimney Cap & Crown Problems We See in Clifton Heights Homes
Here’s why a simple cap or crown job in Clifton Heights often becomes a two-owner conversation before it can start:
- The shared-stack problem. A crown that covers two flues might fail on one side while the other owner hasn’t noticed. That means the repair only proceeds once both owners agree, because the fix covers both openings.
- Terra-cotta cracking in freeze-thaw. The original clay liners in these pre-1950 chimneys spall and crack as water freezes inside them, and the damage wicks into shared masonry, rusting dampers on both sides of the wall.
- Cross-contamination from a neighbor’s appliance. When one owner upgrades an appliance without relining, exhaust can backdraft into the neighbor’s flue. A Level 2 inspection sorts out which liner serves which unit before any cap goes on.
- Ceiling stains from the wrong diagnosis. Water marks near a shared stack usually trace back to a cracked crown and failed flashing at the party wall, not to the roof. Fixing the crown is what stops the leak.
Why Shared Party-Wall Chimneys Make Cap Work a Two-Owner Job
Most of the rowhouses and twins in Clifton Heights were built with chimneys as shared party-wall stacks. That single fact changes how a cap or crown job runs. On an early-1900s twin along a tight block, water stains on a ceiling often trace back to a cracked crown and failed flashing where the stack meets the shared wall, not to the roof. Because the chase usually holds two flues, one per side, a technician has to first confirm which appliance vents into which liner, then coordinate with the adjacent owner before installing a multi-flue cap or rebuilding the crown. The usual fix pairs a poured or coated crown with a new stainless cap and flashing, using components from Gelco or Olympia Chimney to match the paired openings. None of that happens cleanly until both owners are talking, so we plan for it from the start.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Clifton Heights, PA
Cap and crown work is priced per job from a written estimate, and the estimate is free. Typical ranges for Clifton Heights:
- Cap installation (standard): $165 – $395
- Cap replacement (rusted or failed): $145 – $385
- Multi-flue cap: $290 – $620
- Custom cap: $340 – $750
- Crown repair: $275 – $680
- Crown coating: $185 – $420
What moves the number is size, opening count, height, and whether the crown needs a rebuild or just a coating. Shared stacks with two openings run higher because the cap has to cover both. The written estimate sets the final price. Call (833) 432-4886 for an exact quote.
We Also Serve Cities Near Clifton Heights
We cover the boroughs around Clifton Heights, including Aldan, Collingdale, Sharon Hill, and Drexel Hill. If you’re on a rowhouse block just over the line, the shared-stack rules work the same way. You can see our full service area on the Clifton Heights page, or just call and we’ll confirm coverage.
Serving Clifton Heights, PA – Our Local Coverage Area
We serve Clifton Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Clifton Heights
Yes, but it usually needs the neighbor’s agreement if your flue sits inside a shared chase. A single-flue cap can protect your opening, but when both flues open under one crown, a multi-flue or custom cap is the better fit and covers the neighbor’s side too. Call (833) 432-4886 and we’ll talk through which setup your stack actually has.
A cracked crown or failed flashing at the party wall is usually the cause when stains appear near a shared stack, not the roof itself. Southeastern PA’s freeze-thaw and heavy spring rain work on crowns fast. Call (833) 432-4886 for an inspection that shows you the photos.
Exhaust can backdraft into the neighbor’s flue when one side upgrades an appliance without relining, so a Level 2 inspection is the way to confirm which liner serves which unit before capping. Call (833) 432-4886 to book one.
Because the paired flue openings in these attached homes rarely match off-the-shelf sizes, and a loose cap lets water and animals in. Custom sizing fits the actual opening and fastens to a shared crown. Call (833) 432-4886 for a measurement.
Yes. NFPA 211 calls for an annual inspection of the chimney regardless of fuel use, since the flue and crown still take weather damage. Call (833) 432-4886 to schedule yours.
Get Your Clifton Heights Chimney Capped and Crowned
If your cap is rusted or your crown is cracking, the fix is straightforward once we’ve looked at the stack and confirmed the flue layout. We’ll give you a flat price, camera photos, and a written estimate before any work starts. Call (833) 432-4886. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Fishtown.