Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Hunting Park
If your cap is missing or your crown is cracked, you already know water is getting into brick that was never meant to stay wet. We work on the rowhouse chimneys of Hunting Park every week, and we know how tight the roofs and shared stacks here can be. Call (833) 432-4886 and we’ll book an inspection with camera evidence you can see. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Hunting Park Homeowners Call Chimney Sweep Fishtown for Chimney Cap & Crown
Most of the calls we get from Hunting Park start with the same worry: someone told them they need a full rebuild when they might only need a crown coating. We don’t work that way. Every recommendation we make is backed by camera footage of your actual flue, and you get to see it before anything gets approved. If the crown is sound and the cap is doing its job, we say so.
That matters more in Hunting Park than almost anywhere, because the chimneys here are old and the housing stock is dense. The two- and three-story brick rowhouses from the 1890s to the 1920s were built with flues meant for coal, and many have never been properly lined for wood or gas. We know the difference between a chimney that needs work and one that’s simply old, and we tell you plainly which one you have. Our technicians have up to 13 years of experience, and we install cap and crown components from Gelco, Famco, Copperfield and Olympia Chimney, so the parts on your stack are ones you can look up yourself.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Hunting Park
Cap Installation
A cap is the cheapest protection you can put on a Hunting Park chimney. On these blocks, a missing cap lets rain straight into an unlined or clay-tile flue, and it lets squirrels and birds nest in the flue between heating seasons. We install single-flue and multi-flue caps sized to your actual stack, not a hardware-store generic that leaves gaps at the corners.

Cap Replacement
Older caps rust through or get bent by winter storms, and a loose cap can rattle or blow off entirely. If your cap is more than a few years old and the mesh is torn or the top is warped, replacement is usually straightforward. We’ll tell you whether a repair makes sense or whether a new caps is the better call.

Crown Repair
The crown is the concrete or mortar cap at the very top of the chimney, and it’s the first thing freeze-thaw winters destroy. When the crown cracks, water wicks down into the soft old brick below, and that’s when spalling starts. We repair crowns with proper overhang and slope so water sheds away from the flue instead of into it. On party-wall stacks, we check whether the neighbor’s flue vents into the same stack before we touch any brick.

Crown Coating
When the crown is cracked but structurally sound, a crown coating is often the right answer. It seals the surface and buys years before a full repair. Crown coating only works if the underlying crown is intact; if the camera shows deep cracking or separation, coating would just cover a problem that needs repairing. We won’t coat a crown that needs more.
Trusted Brands We Service in Hunting Park
We work with professional-grade cap and crown materials from Gelco, Famco, Copperfield and Olympia Chimney, and we use HeatShield for liner restoration when the flue has deteriorated beyond what a standard liner can fix. We don’t stock parts on a truck or carry a warehouse of inventory, but we can usually get the right cap for your flue size quickly. If you want to research the brands before we install anything, that’s fine with us. The parts should be verifiable, not a mystery.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Hunting Park Homes
- Cracked single-wythe brick crowns. The original crowns on these rowhouses were built thin, and freeze-thaw cycles crack them open. Once water gets behind the crown, it starts working on the brick below.
- Missing or undersized caps on coal-era flues. Many of these flues were designed for coal and never had a proper cap. Rain and animals get in, and the mortar between the flue tiles softens and spalls.
- Shared party-wall stacks. On many Hunting Park blocks, the chimney stack is built into the party wall shared with the next rowhouse. A cap or crown job on one unit often needs the neighbor’s consent before any brickwork can be touched, and that’s a coordination step most contractors don’t plan for.
- Unlined coal-era flues venting modern appliances. Furnaces and water heaters were often connected to flues that were never terra-cotta lined, and the acidic coal soot left behind has already eaten into the mortar. The cap and crown are only part of the story; the flue itself needs a camera check.
Pricing for Chimney Cap & Crown in Hunting Park, PA
Cap installation in Hunting Park typically runs $250 to $600 for a single-flue cap, and multi-flue or custom caps can run $500 to $1,200 depending on the stack size and material. Crown repair usually falls between $400 and $900, and crown coating runs $300 to $650. Prices reflect the tight roof access on these rowhouses and the extra coordination when the stack sits on a party wall. Every job starts with a written estimate, and the estimate sets the final price. No surprises once the work starts.
We Also Serve Cities Near Hunting Park
We also work in Hunting Park and the surrounding neighborhoods, including Olney, Kensington, Port Richmond and Fishtown. If your rowhouse is on a block where the chimney shares a party wall, we’ve likely seen the same construction on a nearby street. Call us and we’ll confirm coverage for your address.
Serving Hunting Park, PA – Our Local Coverage Area
We serve Hunting Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Hunting Park
The only reliable way to know is a camera inspection of the flue. Many 1890s to 1920s rowhouses in Hunting Park were built with coal flues that were never terra-cotta lined, and you can’t tell from the outside. We run a camera down the flue and show you the footage before recommending anything. Call (833) 432-4886 to book an inspection.
Because on many Hunting Park blocks the chimney stack is built into the party wall you share with the next rowhouse. If your neighbor’s flue vents into the same stack, any cap or crown work on your side may need their consent before brickwork starts. We check this before we schedule the job so there are no surprises. Call us to talk through your block.
Sometimes, but only if the crown is structurally sound underneath. A crown coating seals surface cracks and slows water intrusion, but it won’t fix a crown that’s separating from the flue or has deep structural cracking. We use camera evidence to decide whether coating or repair is the right call. Call (833) 432-4886 for an honest assessment.
Most caps last ten to fifteen years, but the freeze-thaw cycles here can shorten that. Check the mesh and the top plate each fall, and replace the cap if it’s rusted through, bent or loose. A failed cap lets water into the flue all winter. Call us if you’re not sure whether yours is still doing its job.
First-degree creosote is a light, flaky soot that a standard sweep removes. Third-degree creosote is a hardened, glazed layer that has baked onto the flue walls and needs more than brushing to remove. If you burn wood in a Hunting Park rowhouse, the long heating season here builds creosote fast. Call (833) 432-4886 to schedule a sweep and inspection.
If your cap is missing, your crown is cracked, or you’re just not sure what’s up there, give us a call. We’ll inspect with a camera, show you what we find, and give you a written estimate before any work begins. Call (833) 432-4886 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Fishtown.