Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Why Fishtown Homeowners Choose Gelco Chimney Cleaning
We provide independent Gelco chimney cleaning service across Fishtown, PA: a level 2 inspection, creosote removal, and cap replacement done by technicians who know how Gelco liners and caps actually fail. What sets our Gelco work apart is that we look at the specific parts a generic sweep skips over, like lined joints, insulation wraps and cap mounts. Chimney Sweep Fishtown connects you with local chimney professionals, and the local pro is licensed and insured as their state requires.
We’re not affiliated with Gelco, and we don’t claim manufacturer authorization. We’re an independent local channel, and our technicians have up to 13 years of experience with systems like these. The written estimate you get before any work is the final price, and we can work with your insurer if a claim comes up.
Call (833) 432-4886. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Chimney Sweep Fishtown for Your Gelco Chimney Cleaning?
Gelco is a chimney cap, and its components show wear in ways that are easy to misread. A loose mounting screw that rattles in the wind isn’t the same problem as a top plate rusting through and letting rain run down the outside of a liner. Technicians in our network know the difference because they work on these fittings regularly, and they can tell you which one you’re looking at after a camera run.
We use quality parts that fit Gelco equipment. When a Gelco liner section, cap, top plate or adapter needs replacement, we prefer a matching component so the system stays consistent and safe. If a Gelco-specific part is discontinued, quality aftermarket stainless clamps and fasteners are acceptable where they fit properly. We don’t claim to stock OEM or genuine Gelco parts, and we’re not a Gelco dealer.
Warranty-safe practice matters here. We don’t modify or force a component that isn’t built for your setup. Before we touch anything, we pull a camera through and show you what’s actually happening in the flue. Every sweep includes a photo report you keep.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Fix in Fishtown
These are the failure modes we see most often on Gelco systems in Fishtown rowhouses. Each one is worth a look before your first fire of the season.
- Flex-Lok liner joint screws backing out or corroding. The screws that hold liner sections together can work loose with heat cycling or corrode over years of use. When they do, sections separate and creosote collects in the gaps, which is a fire hazard and hard to reach with a standard brush.
- Insulflex insulation wrap degrading or waterlogging. Insulation wrap around an insulated liner can break down or hold water after a cap or crown problem lets moisture in. A wet wrap cuts draft and speeds up corrosion on the liner itself, so it’s a symptom worth chasing back to its source.
- Gelco caps loosening or corroding at the mounting screws. A loose cap rattles in the wind and lets water intrude around the flue. Corroded mounting screws are usually the cause. Tightening them isn’t always enough if the metal around them has weakened.
- Liner top plate or cap adapter rusting through. On older Gelco installs, a top plate or cap adapter can rust until it’s porous. Rain then runs down the outside of the liner and into the smoke chamber, which shows up as staining or a musty smell indoors.
- Hidden breaches from former appliance taps. On the two-story rowhouse blocks off Frankford Avenue, flues were often tapped for a former gas water heater or furnace. That leaves a hidden breach in the liner that only shows up during a proper cleaning sweep, not on a visual glance from below.
Gelco Parts & Our Repair-vs-Replace Approach
Gelco-specific components are our first choice when a liner section, cap, top plate or adapter needs replacing. A matched system fits better and holds up longer than a mix of parts that happened to be on hand. Where a part has been discontinued, we’ll use quality aftermarket stainless clamps and fasteners that fit correctly and hold the liner safely.
Our honest stance: repair a sound Gelco liner with the right fittings, and replace a corroded or separated liner rather than patch it. A joint that’s separated or stainless that’s pitted through isn’t something a fitting swap will fix. We show you the camera footage and let you see the difference before you decide. Call (833) 432-4886 for an exact quote – estimates are free.
Our Gelco Service Process – Step by Step
- 1
Diagnosis. We run a level 2 inspection with a camera through the full flue, checking joints, insulation wrap and cap condition. On Fishtown rowhouses with shared party-wall stacks, we also confirm that your flue and the neighbor’s don’t share a breach.
- 2
Repair or install. If it’s a fitting problem, we resecure or replace the affected Gelco sections and cap. If the liner is corroded or separated, we lay out the replacement options and quote before any work starts.
- 3
Test. After the work, we draft-test the flue and check for any remaining gaps, then confirm the cap sits tight and drains correctly.
- 4
Warranty and report. You get a photo report of what we found and what we fixed, so you have a record if a warranty question ever comes up with a product manufacturer.
See the difference
Before
After
Before
After
Before
AfterGelco Products We Service & Install in Fishtown
We service and install chimney caps as part of our regular Fishtown work, including Gelco multi-flue and single-flue caps that need resecuring, replacement or a new mounting setup. Cap installation and replacement is one of our five core services, and it’s often what keeps a liner dry. When the cap or crown is compromised, water works its way in and starts the liner problems listed above.
We inspect every cap alongside the rest of the system during a sweep. That means you’re not paying for a separate call when the cap needs attention.
We Also Service These Brands
Gelco is one piece of the system, and we’re not limited to a single brand. We also work with DuraFlex flexible liner systems for retrofits in older homes where rigid liners won’t fit, and HeatShield ceramic resurfacing for liner restoration. Between those and the Gelco work, we can handle the sweep, the cap, the liner and any repair under one roof. That way you’re not calling a second contractor to finish the job.
FAQs – Gelco Chimney Cleaning Service in Fishtown
No. We are an independent chimney service, not an authorized Gelco dealer or factory representative. We work on Gelco equipment as a third-party service and make no claims of manufacturer authorization. Call (833) 432-4886 for a free estimate.
Yes. We prefer Gelco-specific components for liner sections, caps, top plates and adapters to keep the system matched. Where an original part is discontinued, we use quality aftermarket stainless clamps and fasteners that fit properly. We don’t claim to stock OEM or genuine Gelco parts.
A standard sweep and inspection on a Gelco system usually takes one to two hours, depending on roof access and flue condition. A liner section replacement or cap replacement will take longer, and we’ll give you a time estimate with the written quote. Call (833) 432-4886 to schedule.
We service and install Gelco chimney caps, including multi-flue and single-flue caps. We also handle cap replacement and resecuring. If your system has a Gelco liner, our level 2 inspection covers the joints, insulation wrap and cap condition as part of the sweep.
Not if the service is done correctly and with compatible parts. We use fittings that match your system and avoid modifications that could compromise it. Keep the photo report we give you, and call (833) 432-4886 if you have questions about what your service covers.
A Gelco chimney cleaning in Fishtown typically runs $185 to $350 for a standard sweep and level 2 inspection, with cap replacement often adding $150 to $450 depending on the type and access. Your written estimate is the final price, and we don’t recommend work without camera evidence you can see. Call (833) 432-4886 for an exact quote – estimates are free.
Book Your Gelco Service in Fishtown, PA
If you’re in Fishtown with a Gelco cap or liner, we’ll inspect it, show you what the camera sees, and give you a written price before any work starts. Call (833) 432-4886. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The estimate is free.
Written by the team at Chimney Sweep Fishtown.