Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Fireplace Repair for Fishtown Homeowners
A fireplace that smokes into the room, won’t light, or smells of gas is telling you something is wrong inside the system, and guessing at the cause is how small problems turn into expensive ones. We repair gas and wood-burning fireplaces, inserts, dampers, fireboxes and pilot assemblies across Fishtown, and we name the materials we use so you can check them yourself. Our technicians have up to 13 years of experience, and every visit starts with a camera inspection and a photo report you keep. Same-day repair is often possible when you call early. Reach us at (833) 432-4886. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
What Our Fireplace Repair Service Includes
One call covers the whole fireplace and the flue above it. We diagnose first, show you what we found, and only then talk about repair options and price.
Gas Fireplace Repair
Gas fireplaces fail in a handful of predictable ways: a burner that won’t stay lit, a flame that sits low and yellow, a log set that soots up, or a remote that stops responding. Those symptoms point to the pilot assembly, the thermocouple or thermopile, the gas valve, or blocked burner ports, and the fix depends on which one is failing. We test the components in sequence, replace what has actually failed, and confirm the flame pattern is correct before we leave. If the problem traces back to the gas line itself, we’ll tell you plainly and point you to a licensed gas fitter rather than improvise.
Wood Burning Fireplace Repair
A wood fireplace that drafts poorly, smokes at the damper, or leaves creosote stains on the brick is usually telling you about airflow, not the firebox. We check the flue for blockages and glazing, inspect the smoke shelf and damper, and look for gaps in the firebox joints that let cold air in and smoke out. Where the masonry has cracked or spalled, we repair it with HeatShield ceramic resurfacing where the damage suits that system, and rebuild the firebox where it doesn’t. You get a straight answer on which is needed and why.
Fireplace Insert Service
Inserts sit inside the firebox and connect to their own liner, and that connection is where most insert problems begin. A loose liner collar, a crushed connector, or a surround that no longer seals lets exhaust slip behind the insert instead of up the flue. We pull the insert where needed, inspect the liner and the appliance connection, service the blower and gaskets, and reset the unit so it seats properly. If an insert was installed without a full liner, we’ll show you the evidence and explain what the right liner for that flue looks like.
Damper Repair
The damper is a metal plate above the firebox, and it fails by sticking open, seizing shut, or warping so it no longer seals. An open damper throws your heat up the chimney all winter; a stuck-closed one sends smoke into the room the moment you light a fire. We free seized pivots, replace broken damper frames and plates, and fit top-sealing dampers where the existing assembly is beyond repair. We test the travel by hand before and after so you can feel the difference.
Firebox Repair
The firebox takes the direct heat, so its brick, mortar joints and rear wall crack and erode over time. Cracked joints let heat reach the surrounding structure, which is exactly what firebox repair exists to prevent. We rake out failed mortar and repoint it, replace damaged firebrick, and resurface the box with HeatShield where the brick is sound but the surface has broken down. We photograph the firebox before and after so you can see what changed.
Pilot Light Repair
A pilot that won’t stay lit after you release the knob usually means a worn thermocouple, a dirty orifice, or a draft pulling the flame away from the sensor. We clean the pilot assembly, test the thermocouple and thermopile output, and replace the failed part rather than adjusting around it. Once it holds, we check the main burner ignition and the flame appearance so the repair is complete, not just the symptom hidden. If your unit uses electronic ignition instead of a standing pilot, we diagnose that control sequence the same way.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Fireplace Repair
We work with a short list of professional-grade product lines, and we say which one is going into your chimney before the work starts. DuraFlex flexible liner systems are what we reach for on retrofits in older Fishtown rowhouses, because a flexible liner can follow the bends in a flue that a rigid liner can’t. HeatShield is the ceramic resurfacing system we use to restore a damaged liner or firebox surface from the inside, and it takes specific product training to apply correctly. For caps and covers we install Gelco and Famco, and for the components around the firebox we source through Copperfield.
Knowing a brand means knowing where it wears out. We’ve serviced enough DuraFlex and HeatShield installations to recognize the failure points on sight, and we handle Gelco and Famco caps the same way. We’re not a dealer for any of these lines, and we won’t tell you a part is OEM when it isn’t. Whether you have one of these brands or any other make, we can help.
Signs You Need Fireplace Repair Right Now
Some symptoms can wait a week. Others shouldn’t see another fire. Here’s how we tell the difference.
- Smoke rolling into the room. Smoke that won’t go up the flue points to a blocked flue, a failed damper, or a draft problem from a competing exhaust fan. It’s a sign the system isn’t venting, and it needs looking at before the next fire.
- A gas smell near the fireplace. Any gas odor means shut the valve off and stop using the unit. Don’t test it by lighting it. Call your gas utility first, then call us to inspect the fireplace assembly once the line is cleared.
- Cracks or crumbling mortar in the firebox. Hairline cracks widen with every hot fire, and open joints let heat reach material that isn’t meant to take it. This is the repair we most often wish homeowners had called about sooner.
- A damper that won’t move or won’t seal. A damper stuck open wastes heat all winter; one stuck shut makes the fireplace unusable. Both are mechanical repairs we can usually complete in a single visit.
- Soot streaks or staining above the firebox. Staining on the brick or the mantel face means exhaust is escaping where it shouldn’t. It’s evidence the seal or the flue has failed, and a camera inspection will show exactly where.
Our Fireplace Repair Process – Step by Step
- 1
We ask what you’re seeing. Before anyone arrives, we want to know whether the fireplace smokes, won’t light, smells, or simply looks wrong. That conversation narrows the diagnosis and often tells us which tools to bring.
- 2
Full inspection with a camera. We inspect the firebox, damper, smoke chamber and flue with a camera, because the cause of a fireplace problem is frequently above the firebox. The photo report is yours to keep, and it’s the basis for everything we recommend.
- 3
You see the evidence before we quote. We show you the photos, explain what each one means, and tell you what can safely wait. Nothing gets recommended without a picture behind it.
- 4
Written flat-price estimate. You get the price in writing and agree to it before any repair begins. No surprises added on at the end.
- 5
Repair, test and clean up. We complete the work, run the fireplace through a full cycle to confirm it drafts and burns correctly, and leave the room as we found it. If a follow-up visit is needed for a part, we book it before we leave.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Repair Cost in Fishtown?
Most fireplace repairs in Fishtown land between $150 and $900, with the final number set by the written estimate after we’ve seen the unit. A damper repair typically runs $150 to $350. Pilot light and thermocouple work on a gas fireplace usually falls between $180 and $400. Firebox repointing or HeatShield resurfacing runs $400 to $900 depending on how much surface is involved. Insert service and liner connection work starts around $250 and climbs when a liner needs replacing.
What moves the price: the type of fireplace, how far the damage has gone, whether parts are a standard fit or need ordering, and whether the flue itself needs attention alongside the fireplace. What keeps it fair: a written estimate before work starts, a photo report you can inspect, and a flat price agreed in advance rather than an hourly rate that drifts. We tell you when a repair can safely wait so you’re not pushed into work you don’t need yet. The estimate is free. Call (833) 432-4886 for yours. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Fireplace Repair Near Fishtown – Our Service Area
We work across Fishtown and the neighborhoods around it, including Kensington, Port Richmond, Northern Liberties and Hunting Park, and out through Aldan, Sharon Hill, Collingdale, Clifton Heights, Drexel Hill, Colwyn and Haverford College. Rowhouse construction is common through this part of the city, and those shared chimneys behave differently from freestanding ones, so we plan for it. When you call, we’ll give you a realistic arrival window. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. For the wider picture of what we do, see Chimney Sweep Fishtown.
Serving Fishtown, PA – Our Local Coverage Area
We serve Fishtown and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fireplace Repair in Fishtown
Fireplace repair is the work of fixing the parts of the fireplace itself, as opposed to the flue above it: the firebox, damper, gas burner, pilot assembly, insert connection and surrounding masonry. It’s diagnostic work first, because the same symptom can come from several causes. We inspect with a camera and show you what we find before recommending anything. If the problem turns out to be in the chimney rather than the fireplace, we handle fireplace repair and the flue together so you’re not left finding a second contractor.
Most single-item repairs, like a damper, pilot assembly or thermocouple, are done in one visit of one to two hours. Firebox resurfacing and insert service usually take longer, and some jobs need a second visit for parts. We’ll tell you at the estimate which category your job falls into. You won’t be left guessing about the timeline.
Typical fireplace repairs in Fishtown run $150 to $900, depending on the component and how far the damage has spread. Damper work sits at the low end, firebox resurfacing at the higher end, and gas pilot repairs fall in between. The written estimate sets the final price, and it’s agreed before work starts. Call (833) 432-4886 for an exact quote. Estimates are free.
Yes. We install and service DuraFlex flexible liner systems and apply HeatShield ceramic resurfacing, along with Gelco and Famco caps and Copperfield-sourced components. Those are the brands we’re trained on, and we’ll say so plainly when a job involves one of them. If your fireplace uses a different make, we can still diagnose and repair it. We won’t claim expertise on a product line we don’t work with.
Same-day repair is often possible when you call early in the day and the part is a standard fit. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. We’re closed Saturday.
Yes, our work carries a satisfaction guarantee, and we stand behind the repair itself along with the materials we install. If something we fixed isn’t behaving the way it should, call us and we’ll come back out. The details are set out in writing with your estimate so there’s no ambiguity.
Clear the hearth and a few feet in front of the fireplace so we can work safely, and move anything fragile off the mantel. If it’s a gas unit, leave the gas on only if the fireplace is currently safe to test; if you’ve smelled gas, shut the valve and call your utility first. Have any paperwork or manuals you have on hand, especially for inserts. For a look at related work in nearby towns, see our fireplace repair page for Aldan and fireplace repair page for Sharon Hill.
Schedule Your Fireplace Repair Service in Fishtown Today
If your fireplace is smoking, won’t light, or hasn’t been opened up in years, one visit with a camera will tell you where you stand. Call (833) 432-4886 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. You’ll see the evidence, get a written flat price, and know exactly what can wait.
Written by the team at Chimney Sweep Fishtown.