Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Colwyn
Colwyn homes sit close together, and their chimneys do too. That makes cap and crown work here a different job than it is in the newer developments just outside the borough line. We know the tight alleys, the shared stacks, and the clay tile flues that come with Colwyn’s older twin and single homes, and we plan every cap and crown visit around them. If rain is getting into your flue or a crown has started to crumble, call (833) 432-4886. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, covers Colwyn and the rest of Delaware County.
Why Colwyn Homeowners Call Chimney Sweep Fishtown for Chimney Cap & Crown
Chimney Sweep Fishtown handles the whole chimney system, from the sweep to the rebuild, so a cap or crown problem never turns into a handoff to a second contractor halfway through. Our technicians have up to 13 years of experience, and they work on Colwyn’s party-wall stacks often enough to know what to look for before anyone climbs. We name the materials we use. When a cap goes on, it’s a Gelco or Famco cover, not a hardware-store substitute, and you can research those brands yourself before we start.
Getting to a Colwyn roofline takes patience. Rows of attached homes mean roof access runs through narrow alleys and over adjacent properties, and we plan for that instead of discovering it on arrival. That local knowledge is why neighbors on Pine Street and along the borough’s side streets call us back. Estimates are free and the price is set per job by the written estimate, agreed before we book. No one gets a surprise on the invoice.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Colwyn
For this page we’ll focus on the four jobs Colwyn homeowners ask about most. Each one starts with a look at the flue itself, because a cap or crown that ignores the tile below it just moves the problem.
Cap Installation in Colwyn
A new cap keeps rain, birds and debris out of an open flue. In Colwyn, where summer rains soak into uncapped stacks and rust dampers and fireboxes over time, a properly sized cap is the cheapest protection you can add. We size stainless and copper covers to the original clay tile, not to whatever fits loosely.

Cap Replacement in Colwyn
Old caps fail at the seams, at the screen, or where they were never fastened down for wind. On Colwyn’s tight rooflines, a loose cap can also knock against a neighbor’s stack. We remove the old cover, check the flue for damage underneath, and install a replacement that’s secured for the exposure this borough gets.

Crown Repair in Colwyn
The crown is the concrete or mortar cap at the top of the chimney that sheds water away from the brick. In Colwyn’s 1890 to 1930 housing stock, original crowns crack and spall, and water runs down into the flue. We rebuild failed crowns so the slope carries water off the chimney instead of into it.

Crown Coating in Colwyn
When a crown is cracked but still sound, a flexible coating can seal it and buy years before a rebuild. We use crown coatings that move with the masonry through Colwyn’s cold winters and humid summers. If the crown is too far gone to coat, we’ll tell you plainly rather than sell a coating that won’t hold.
Trusted Brands We Service in Colwyn
We work with a roster of professional-grade brands: Famco and Gelco for caps and covers, Copperfield-sourced components, DuraFlex flexible liners for retrofits, and HeatShield for ceramic liner resurfacing. We don’t claim to keep a warehouse of parts. What we do is specify the right product for your flue and get it onto the roof without a long wait. On Colwyn’s shared stacks, the right multi-flue cap from Famco or Gelco usually means a custom fit to the original tile layout, and that’s exactly what these lines are built for. You can look up any of them before you commit.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Colwyn Homes
Colwyn’s housing stock produces a handful of cap and crown problems again and again. Here’s what we run into:
- Shared party-wall flues. In Colwyn’s dense rows of century-old worker cottages, two homes often vent into the same stack. A cap installed on one side only can change the draft for both, so a neighbor’s wood stove or furnace starts backdrafting smoke.
- Cracked clay tile liners. The original clay tiles in these homes crack and spall after decades of hot and cold cycles. When the liner fails, the crown separates and water seeps in, which rusts dampers and fireboxes over time.
- Cross-contamination from a neighbor’s creosote. A neighbor’s third-degree creosote glaze can send odor and smoke through a shared flue. That’s a draft problem a cap alone won’t solve, and it’s why we inspect the whole stack before quoting.
- Tight alley access and adjacent rooflines. Proper flashing and cap securement are harder when the roofline runs right up to the next house. Done carelessly, wind-driven rain and debris still find a way into uncapped or poorly sealed flues.
In a typical Colwyn job, a cracked clay liner and a spalling brick crown go unnoticed until a neighbor’s appliance begins backdrafting into the shared flue. A qualified local pro starts with a Level 2 inspection to map the flue paths, then replaces the crown with a cast-in-place or coated surface and fits a multi-flue cap sized to the original clay tiles. On these blocks, that often means coordinating access through tight alleys and across adjacent properties before anyone touches the roof.
Pricing for Chimney Cap & Crown in Colwyn, PA
Here’s what cap and crown work typically runs in Colwyn. A standard single-flue cap installation runs around $275 to $550, depending on the cover material and flue size. A multi-flue or custom cap for a shared stack usually lands between $450 and $900. Crown repair runs roughly $350 to $850, and a crown coating is the lighter job at about $250 to $500. Full crown rebuilds on a badly spalled stack can go higher, and we’ll tell you when that’s the case. What moves the number is access, the number of flues, and whether the tile underneath needs attention. Every estimate is free, and the written estimate sets the final price. Call (833) 432-4886 for an exact quote.
We Also Serve Cities Near Colwyn
We work the same party-wall and older-housing problems in Sharon Hill, Collingdale, Aldan and Clifton Heights. If you’re near the Colwyn line and your stack shares a wall with a neighbor’s, the same coordination applies. Reach out and we’ll schedule a look. Our chimney cap & crown team covers the whole area.
Serving Colwyn, PA – Our Local Coverage Area
We serve Colwyn and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Colwyn
Yes, but it takes planning, not a one-sided install. On a shared stack, the cap has to cover both flues or be fitted so it doesn’t change the draft on the other side. We inspect the full flue path first and fit a multi-flue cap sized to the original tiles so both appliances keep venting correctly. Call (833) 432-4886 for an exact quote; estimates are free.
A crown that’s cracked but still sound can usually be coated; one that’s spalled down to loose brick needs a repair or rebuild. The deciding factor is whether the mortar still holds together and whether water is reaching the flue below. We check the crown from the roof and recommend the lighter option when it’s genuinely safe. Call (833) 432-4886 to book a look.
A custom or multi-flue stainless or copper cap sized to the original clay tile openings works best. Off-the-shelf covers rarely seat cleanly on old tile, and a loose fit lets rain and debris in at the edges. We fit Gelco and Famco covers sized to the flue, not to whatever is in stock. Call (833) 432-4886 for an exact quote.
It can. A shared stack lets a neighbor’s heavy creosote glaze send odor and smoke into your side, and it can throw off the draft for both appliances. That’s not a cap problem alone; it needs a proper inspection of the whole shared flue before any work starts. Call (833) 432-4886 and we’ll map it out. Estimates are free.
Because those original clay tiles crack and spall faster here. Colwyn’s cold winters harden creosote and its humid summers let rain seep into uncracked but aging flues, so a small liner flaw can turn into crown separation and water damage within a season. An annual look catches it early, before it becomes a rebuild. Call (833) 432-4886 to schedule yours.
If your Colwyn chimney needs a cap, a crown repair, or a custom cover for a shared stack, we’ll take a look and give you a straight answer. Nothing gets recommended without camera evidence you can see for yourself, and we’ll tell you plainly when work can safely wait. Call (833) 432-4886 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Fishtown.