Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Drexel Hill
If your cap is loose or your crown has a crack running to the flue edge, call (833) 432-4886. We handle cap and crown work throughout Drexel Hill, from the twin blocks near Lansdowne Avenue to the four-squares off Burmont Road, and we know why these older stacks fail the way they do. Most homes here were built between 1900 and the 1930s, which means the chimney you’re looking at was designed before anyone thought much about caps or liners. That changes how a crown job gets scoped. We stock and install Gelco and Famco caps and covers, professional-grade parts rather than hardware-store substitutes, so the cap that goes on your Drexel Hill stack actually fits the flue it’s protecting. Our technicians have up to 13 years of experience.
Why Drexel Hill Homeowners Call Chimney Sweep Fishtown for Chimney Cap & Crown
We’re a chimney and fireplace specialist, not a general handyman or an HVAC shop that sweeps on the side. That matters in a town like Drexel Hill, where the work is rarely a simple cap swap and more often a conversation about what a century-old unlined brick flue can safely handle. One call covers the whole chimney: sweep, cap and crown, liner, rebuild, fireplace repair. No handing you off to a second contractor to finish what the first one started.
Our reputation around Drexel Hill comes from naming the materials we use. When we recommend a DuraFlex flexible liner for an older flue that won’t take a rigid one, or HeatShield ceramic resurfacing to restore a damaged smoke chamber, you can research those products yourself before you say yes. Nothing is proposed without camera evidence you can watch on the screen. If a crown is fine and a coating isn’t needed yet, we’ll tell you that and move on. Homeowners on the twin blocks here have watched too many contractors invent work from the sidewalk. We don’t operate that way.
Getting to Drexel Hill is straightforward from our service area, and we cover the whole town, including the streets feeding off Township Line Road and the blocks down toward the old trolley corridor. Call (833) 432-4886. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Drexel Hill
The three jobs we do most on Drexel Hill stacks are multi-flue caps, crown repair, and crown coating, though we handle the full set of cap and crown work. Here’s what each involves.
Multi-Flue Cap Installation in Drexel Hill
A two-flue party-wall stack needs a cap sized to the whole clay-tile opening, not two stovepipe caps screwed over one side. On the twin blocks, single-flue caps leave the neighbor’s flue open, and downdrafts off the surrounding hills push creosote odor and damp air back into one side of the twin. We measure the full opening and fit a Gelco or Famco multi-flue cover with the right mesh for the flue count. For a standard twin chimney, that’s usually a straightforward morning.

Crown Repair in Drexel Hill
Original mortar crowns on 1900s – 1930s stacks crack along the flue edge and spall through Delaware Valley freeze-thaw. Once that crack opens, meltwater runs down an unlined brick flue instead of shedding off the cap. Crown repair means removing the failed mortar, rebuilding the slope and overhang, and tying it back to a sound flue tile. We photograph the crown from the roofline and show you the footage before we quote the rebuild. If the crack is cosmetic and the slope still sheds water, we’ll say so.

Crown Coating in Drexel Hill
A cast crown coating makes sense when the crown is sound but porous, which is common on the brick and Wissahickon schist twins here after decades of wet winters. A flexible coating seals the surface and bridges hairline cracks before they widen into a repair. It’s the lighter option, and we only recommend it when the inspection camera and the roofline photos support it. When the crown is genuinely failing, a coating is a waste of your money and we won’t sell you one.

Cap Replacement and Custom Caps in Drexel Hill
When an old cap is rusted through or sized for a stovepipe rather than the clay-tile opening, replacement is the fix. Caps sized too small let squirrels and rain in, and the resulting damp masonry hides second-degree creosote that a routine brush-and-vac never addresses. For odd stack dimensions or multi-flue set-ups, we build a custom cap to fit. Every replacement goes in with the correct mesh and a proper mounting that won’t rattle loose in a winter wind.
To see our full range of cap and crown work, visit our chimney cap & crown page.
Trusted Brands We Service in Drexel Hill
We install and service professional-grade cap and crown products from Gelco and Famco, and we work with Copperfield-sourced components, the professional distributor trusted by certified chimney sweeps nationwide. Where a flue needs relining as part of the job, we use DuraFlex flexible liner systems for retrofits in older homes, and HeatShield for ceramic resurfacing of damaged flues. These are brands you can look up and verify. We name them because the material quality matters on a chimney that has to shed water for another thirty years. We don’t claim to stock parts on a truck; we source what the job needs and schedule the return visit.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Drexel Hill Homes
- Cracked mortar crowns on original stacks. The crown on a 1920s exterior stack often cracks along the flue edge and spalls through freeze-thaw, so water runs down the flue instead of off the cap. Left alone, that water works into the smoke chamber and the mortar joints below.
- Single-flue caps on a shared party-wall chimney. Many twins have one exterior stack carrying two separate flues for two addresses. A cap fitted to only one flue leaves the neighbor’s side open to rain and downdrafts.
- Undersized caps fitted for a stovepipe. Off-the-shelf caps sized for a liner rather than the full clay-tile opening let squirrels and weather in. The damp masonry that follows can hide second-degree creosote a brush-and-vac won’t touch.
- Cracked parged fireboxes inside the house. The parged firebox on a 1900s – 1930s home cracks from seasonal movement even if the fireplace sees light use. It’s worth a look during the same visit as the cap work.
Pricing for Chimney Cap & Crown in Drexel Hill, PA
Here’s what cap and crown work typically runs in Drexel Hill, estimated per job:
- Standard single-flue cap installation: $175 – $325
- Multi-flue cap for a twin party-wall stack: $300 – $600
- Custom cap: $450 – $900
- Crown coating: $350 – $700
- Crown repair or rebuild: $500 – $1,100
What moves the price is access to the stack, whether the crown needs a partial or full rebuild, the number of flues, and whether a cap has to be custom-built to fit the opening. These are estimates, and the written estimate we hand you sets the final price. That’s set per job, and the estimate is free. We don’t recommend liner or rebuild work off a cap visit unless the inspection supports it, and you see the camera footage first. Call (833) 432-4886 for an exact quote.
We Also Serve Cities Near Drexel Hill
Our cap and crown work extends beyond Drexel Hill into the surrounding communities: Aldan, Clifton Heights, Collingdale, and Sharon Hill. If you’re just over the line in one of these towns, the same camera-first approach applies. We know the same early-1900s housing stock and the same winter weather pattern that cracks crowns across the region. Learn more about the area we serve on our Drexel Hill page.
Serving Drexel Hill, PA – Our Local Coverage Area
We serve Drexel Hill and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Drexel Hill
Yes, but the job needs to be scoped per flue. On a shared party-wall stack, we can cap the flue that serves your side while leaving the neighbor’s flue as it is, though at that point the chimney is only half-protected and a full multi-flue cap is usually the better call. Often we need the neighboring owner present and aware before we touch anything on the shared stack, and we won’t bill work on a flue that isn’t yours. Call (833) 432-4886 to talk it through.
The crack usually isn’t from burning; it’s from seasonal movement and moisture in the masonry. Parged fireboxes on 1900s – 1930s Drexel Hill homes crack as the house shifts and the parge coating dries out over years, whether you build fires often or not. It’s worth a look during the same visit as the cap work, because a crack in the parge lets moisture into the firebox brick behind it. Call (833) 432-4886 for an estimate.
You’ll see the evidence yourself. We photograph the crown from the roofline and run a Level 2 inspection camera down the flue, then show you the footage before recommending anything. If the crack is cosmetic and the slope still sheds water, we’ll tell you it can safely wait. Nothing gets recommended without camera evidence you can watch. Call (833) 432-4886 for an inspection.
Not always, but often. A standard multi-flue cover fits many two-flue stacks, and we size the Gelco or Famco cover to the full clay-tile opening. A custom cap is the exception, for odd dimensions or a stack where the flues sit unevenly. Whether yours needs custom work shows up in the measurements we take on the first visit. Call (833) 432-4886 for an exact quote.
NFPA 211 calls for an annual inspection of every chimney, plus a sweep when the inspection calls for it. In a Drexel Hill home with unlined brick flues and a party-wall chimney shared with a neighbor, the annual look is worth keeping up, because a cracked crown or a loose cap is hard to spot from the ground. If the inspection shows a coil of creosote or a failed crown, we say so and quote the fix. Call (833) 432-4886 for an estimate.
Whether you’re on a twin block or in a four-square off the main road, cap and crown work on an old Drexel Hill stack deserves a specialist who names the parts and shows you the evidence. Call us at (833) 432-4886 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Fishtown.