Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Fairmount
If you own a rowhouse in Fairmount, your chimney was probably built before anyone in the neighborhood had a furnace, and its cap and crown were sized for a world that no longer exists. We work on Fairmount chimneys of exactly that vintage – narrow brick stacks rising through the middle of the house, soft old mortar, clay tile openings that have been capped, recapped, and repurposed a dozen times. Our technicians have up to 13 years of experience, we answer 24/7, and we dispatch Sunday through Friday from 7am to 7pm. Call (833) 432-4886 and we’ll get a free estimate on the books.
Cap and crown work is where the industry’s worst upselling lives. A crown with a hairline crack does not always need to be rebuilt, and a cap with a bent screen does not always need to be replaced. We won’t tell you otherwise without camera footage you can watch yourself, on your own screen, before you agree to anything.
Why Fairmount Homeowners Call Chimney Sweep Fishtown for Chimney Cap & Crown
Fairmount is rowhouse country. The housing stock runs from roughly the 1860s to the 1920s, tight brick two- and three-story buildings with interior chimneys and the occasional trinity rear ell, and a lot of those chimneys have been through coal, oil, and gas venting without ever getting a proper liner. That’s the work we do here, and it’s a different job than a suburban house with a freestanding chimney on an exterior wall.
We name the materials we use because you should be able to look them up. Gelco and Famco caps, Copperfield components – these are the parts professionals specify, not the big-box substitutes that show up on a Fairmount roof and fail in three winters. Our technicians have up to 13 years of experience with this exact class of chimney.
Response into Fairmount is quick. We’re a Fishtown-based operation working the surrounding neighborhoods constantly, and Fairmount sits right in that orbit. When you call, you get a real conversation about what you’re seeing up there, not a script.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Fairmount
Most Fairmount calls land on one of four jobs. Here’s what each one actually involves on a rowhouse chimney.
Cap Installation in Fairmount
A new cap on a Fairmount stack has to be sized to the actual flue tile opening, not a stock dimension from a shelf. On a party-wall chimney that means measuring each tile, confirming which one serves your appliances, and fitting a cap that seals without blocking draft. We install Gelco and Famco caps built for that kind of precision fit.

Cap Replacement in Fairmount
Old caps on Fairmount rowhouses tend to fail at the legs and the screen, especially after a few nor’easters have pushed rain sideways into them. When we pull a failed cap we inspect the tile below it before setting anything new, because a loose tile at the crown is a much bigger problem than the cap that was hiding it.

Crown Repair in Fairmount
The crown is the concrete wash at the top of the stack that sheds water away from the brick. Philadelphia’s freeze-thaw winters punish these on old Fairmount chimneys – a crack lets water in, the freeze widens it, and by the next spring the crown is spalling and the soft 19th-century brick just below it is going with it. We rebuild crowns to shed water properly off a shared stack, not just off one side of it.

Crown Coating in Fairmount
Not every crown needs a rebuild. A crown that’s sound but showing surface wear can be coated to buy it years, and we’ll tell you plainly when a coating is the right call and when it’s just postponing a repair. HeatShield’s resurfacing products are part of how we handle the flue side of the same job when the liner needs attention too. Our chimney cap & crown team can walk you through the difference on your roof.
Trusted Brands We Service in Fairmount
We work with a fixed roster of professional-grade brands – Gelco and Famco for caps, Copperfield for components, DuraFlex for flexible liner retrofits, HeatShield for ceramic resurfacing – and we tell you which one is going on your chimney and why. That matters on Fairmount rowhouses, where a flexible DuraFlex liner is often the only thing that will make the turn through an old offset flue. We don’t claim to stock parts or run trucks out of a local warehouse. What we do is specify the right part for your stack and get it installed without a second contractor.
Common Chimney Cap & Crown Problems We See in Fairmount Homes
- Cracked crown wash on soft old brick. The original crown cracks, nor’easter rain tracks behind the flashing, and the 19th-century brick below it spalls. By the time a homeowner notices a stain on the ceiling, the crown has usually been failing for a few seasons.
- Stock caps forced onto a multi-flue party-wall stack. A shared stack in Fairmount often has several clay tile openings of different sizes. A single-flue cap jammed over the wrong one leaves gaps that admit rain, birds, and downdraft.
- Freeze-thaw loosening flue tile at the crown. When a cap is missing or badly seated, water gets into the tile joints and the freeze cycles work them loose. That’s a crown-level repair, not a cleaning.
- Unlined flues quietly venting into a neighbor’s space. An original brick flue with no liner and a crushed or disconnected shared chase can push combustion gases into the adjoining rowhouse’s flue space. It’s rare, it’s serious, and it’s the reason we trace flues before we cap anything.
Pricing for Chimney Cap & Crown in Fairmount, PA
Here’s what these jobs typically run in Fairmount, as estimates you can plan around.
| Service | Typical Fairmount range |
|---|---|
| Single-flue cap installation | $250 – $550 |
| Multi-flue or custom cap | $450 – $900 |
| Crown coating | $300 – $650 |
| Crown rebuild | $800 – $2,000 |
What moves the number: how many flue tiles the cap has to cover, whether the stack is shared, how much of the crown has to come off before sound masonry turns up, and whether the repair needs a lift or ladder access on a narrow rowhouse lot. A written estimate sets the final price, and the estimate is free. Nothing gets added after the fact.
See the difference
Before
After
Before
After
Before
AfterWe Also Serve Cities Near Fairmount
Fairmount sits close to a lot of the neighborhoods we already work in. If you’re in Northern Liberties, Center City, Fishtown, or Hunting Park, the same party-wall and old-flue issues come up, and the same cap and crown work applies. You can read more about how we serve Fairmount and the surrounding blocks on our city page. One call covers the whole chimney, whichever side of the neighborhood line you’re on.
Serving Fairmount, PA – Our Local Coverage Area
We serve Fairmount and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Fairmount
Yes. A cap can be fitted to the individual tile opening that serves your appliances without touching your neighbor’s flue, and on a shared party-wall stack that’s usually exactly what we do. The first step is tracing which clay tile actually belongs to your address, because on a rowhouse stack that isn’t always obvious from above. Once we’ve confirmed the flue, we size the cap to that tile opening so it seals without changing draft on the adjoining side. Call (833) 432-4886 for a free estimate.
The difference is whether the crown is structurally sound or just weathered. A sound crown with surface wear can take a coating that buys it years. A crown with deep cracks, separation from the brick, or spalling masonry beneath it needs a rebuild, and a coating would just trap water against failing masonry. We won’t make that call from the ground. We run a camera and photograph what we find, and you see it before you decide. Call (833) 432-4886 to book an inspection.
It does. An appliance vent needs a cap sized for the actual flue and terminations that let it draft correctly, not a decorative unit with a tight mesh that chokes it. On an unlined brick flue in a Fairmount trinity, the flue itself may also need attention before the cap goes on, because capping a flue that was never lined correctly just locks in the problem. We inspect the flue first, then specify the cap. Call (833) 432-4886 for a free estimate.
Because a single masonry stack here often serves flues for two or three attached homes on the same block. When a flue is disconnected, crushed, or venting into a shared chase, the effect can reach the adjoining rowhouse, and a repair on one side can change draft on the other. That’s why we trace flues before setting any cap on a Fairmount party-wall stack. It’s not a complication we invented – it’s just how these chimneys were built. Call (833) 432-4886 and we’ll walk you through what your stack is doing.
Yes, and often more so, because an unused chimney still takes water, birds, and freeze-thaw damage at the crown whether or not anyone lights a fire in it. On a soft-brick Fairmount stack, an open flue is an invitation for nor’easter rain to track down behind the flashing and into the masonry. A properly fitted cap keeps that out. If the crown is also failing, we’ll show you the photos and tell you plainly whether the repair can wait a season. Call (833) 432-4886 for a free estimate.
How Chimney Cap & Crown Work Goes on a Typical Fairmount Rowhouse
On a typical Fairmount rowhouse, the exterior crown wash is cracked and the soft old brick just below it is spalling. Nor’easter rain runs behind the flashing and down the outside of an unlined clay-tile flue that was sized decades ago for coal. Because the stack is often shared, the technician first traces which flue tile belongs to which address, then runs a camera down to confirm the liner condition. Only then does the crown get rebuilt and a custom or multi-flue cap get set to the actual tile openings rather than a stock unit.
Fairmount’s humid summers and freeze-thaw winters are hard on these crowns. Fall inspections here routinely turn up deteriorated crown masonry and loose flue tile, not just soot buildup. That’s why we start with camera evidence and not with a recommendation.
Key Takeaways
- Fairmount’s rowhouses often share a single masonry stack between attached homes, so flues get traced before any cap is set.
- Original crown wash cracks, water gets in, and soft 19th-century brick spalls – a crown-level repair, not a cleaning.
- Custom and multi-flue caps are the right fit for party-wall stacks with several tile openings of different sizes.
- Nothing is recommended without camera footage you can see yourself.
- Typical Fairmount pricing: caps $250 – $900, crown coating $300 – $650, crown rebuild $800 – $2,000, free estimate.
Call for a Free Chimney Cap & Crown Estimate in Fairmount
If you’re seeing cracked masonry at the top of the stack, a cap that’s come loose, or water stains on a ceiling you can’t explain, call us and let’s look at it properly. Call (833) 432-4886. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The estimate is free, the price is set per job by the written estimate, and you’ll see the camera footage before anyone recommends a repair.
Written by the team at Chimney Sweep Fishtown.