Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Why Fishtown Homeowners Choose DuraFlex Chimney Cleaning
We provide independent DuraFlex chimney cleaning service in Fishtown, PA. That means we work on DuraFlex flexible stainless steel liners already installed in Fishtown rowhouse chimneys, and we diagnose and clean them on their own terms rather than treating a liner as just another flue. What makes our DuraFlex work different is the detail: we inspect the termination, the top plate, the insulation wrap and the appliance connection along with the flue itself, because on a lined chimney those parts fail far more often than the liner does.
To be clear about who we are: Chimney Sweep Fishtown is an independent service provider. We are not affiliated with, authorized by, sponsored by or certified by DuraFlex, and we don’t speak for the manufacturer. We service, repair and install DuraFlex liner systems with quality parts that fit them, and we tell you plainly when a problem is at the top of the chimney rather than the length of it. For a free estimate on DuraFlex service in Fishtown, call (833) 432-4886. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Chimney Sweep Fishtown for Your DuraFlex Chimney Cleaning?
Our technicians have up to 13 years of experience, and a good share of that time has been spent inside lined flues in Fishtown, where a flexible stainless liner is often the only thing that made an old rowhouse chimney usable again. We know how these liners behave when they’re swept, how they flex where a flue offsets, and what a failing termination looks like before water gets into the annulus. That familiarity is the whole value here. A generalist sweep who mostly handles bare clay tile can pass a brush through a DuraFlex liner and call it done without ever checking whether the cap is still seated or the top section still has its insulation.
We use quality parts chosen to fit DuraFlex equipment: top plates, caps, fasteners and appliance connectors sized to the liner’s diameter and wall type, not whatever a hardware store has on the shelf. Matching parts matters more on a flexible liner than on almost anything else in a chimney, because a poor seal at the top is how most water damage starts. Everything we do is warranty-safe in the sense that we don’t cut, crush, solvent-clean or otherwise mistreat the liner, and we don’t install components that compromise it. We are not a DuraFlex dealer and we don’t claim factory training. We’re an independent chimney specialist working on a product line we know well. If you want an honest read on a DuraFlex system in Fishtown, that’s what we do.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common DuraFlex Chimney Cleaning Problems We Fix in Fishtown
DuraFlex liners are durable, but they aren’t maintenance-free. These are the problems we run into most often on Fishtown chimneys, and each one has a cause worth understanding before you decide what to do about it.
- Corroded or loosened top plate and cap fasteners. The termination sits in the weather year-round, and Philadelphia’s freeze-thaw winters work on stainless fasteners and gaskets the same way they work on the brick around them. When a fastener corrodes or backs out, the cap lifts slightly and water finds its way into the annulus between liner and flue. Rust streaks on the chimney exterior are the usual first sign.
- A liner that’s the wrong size for the flue or the appliance. When a flexible liner is oversized for the flue or undersized for the appliance it serves, gases slow down in the offset and transition sections and creosote builds up unevenly along the run. A sweep that only measures at the bottom can miss it entirely. This is why we check size against the appliance, not just against the flue opening.
- Torn or crushed liner where it flexes around an offset. A flexible liner is designed to bend, but repeated contact from an oversized or stiff sweep brush, or debris dropped down the flue, can tear the wall or crush a section at a bend. Fishtown’s rowhouse flues offset often, so this is a real risk if the liner isn’t handled with the right equipment.
- Missing or degraded insulation wrap at the top section. The insulation around a liner is what keeps flue gases hot and prevents condensation on the liner’s outer wall. When the wrap breaks down near the top, condensation forms, and you get exterior rust staining even though the flue below is fine. Insulation that looks intact from the firebox can be gone by the time it reaches the cap.
- A hidden breach from an old appliance tap. On the two-story rowhouse blocks off Frankford Avenue, we routinely find flues that were once tapped for a gas water heater or furnace. The old connection was capped or abandoned, but the breach into the flue is sometimes left open behind mortar or a plate. It only shows up during a cleaning sweep or a Level 2 inspection, and until then it quietly undermines draft.
One pattern worth knowing about, because it isn’t obvious and you won’t get it from a manufacturer’s general page: a homeowner notices rust streaks down the chimney exterior and a loose cap after a winter of use, and assumes the liner has failed. A Level 2 inspection often shows the opposite. The liner is sound, and the real culprit is a corroded top plate or a failed cap gasket. The typical fix is to remove and reseat the cap with a proper DuraFlex-compatible top plate and stainless fasteners, then confirm the liner’s insulation and flue size are still correct before the next burn season. That’s a termination repair, not a reline, and the difference is worth several thousand dollars.
DuraFlex Parts & Our Repair-vs-Replace Approach
A DuraFlex liner is engineered as a system, and that shapes how we approach every job. Replacement components like top plates, caps and appliance connectors need to match the original liner’s diameter and wall type. Generic aftermarket clamps and caps often don’t seal correctly against a flexible liner, and a cap that doesn’t seal is worse than no repair at all because it lets water in while looking finished. We choose parts by fit, not by what’s easiest to get.
Our repair-versus-replace thinking is simple. If the liner itself is sound, we repair the termination and the insulation rather than pushing a full reline. Relining is the right call when the liner is torn, crushed at an offset, or so far undersized that creosote keeps building no matter how often it’s swept. We don’t recommend either path without camera evidence you can see for yourself, and we say plainly when a repair can safely wait until the next burn season.
If you’re not sure which side of that line your DuraFlex system is on, call (833) 432-4886 for a free estimate. We answer 24/7.
Our DuraFlex Service Process – Step by Step
- 1
Diagnosis. We start with a Level 2 inspection of the whole system: firebox, flue, liner, offset sections, termination, cap and top plate. Camera inspection lets us see the liner’s inner wall and the insulation at the top, and you get a photo report of what we found. On Fishtown rowhouses this is also where we check for a former appliance tap and for a party-wall stack shared with a neighbor’s flue.
- 2
Repair or install. If the liner is sound, we reseat or replace the cap and top plate with DuraFlex-compatible parts and stainless fasteners, and restore the insulation wrap. If it needs a reline, the new DuraFlex liner is sized to the appliance and the flue, with the correct wall type and insulation for the job.
- 3
Test. After the work we confirm draft and check the termination seal, then verify the liner’s flue size and insulation are still correct for your appliance. We’d rather catch a sizing problem on the roof than after your first fire.
- 4
Warranty and records. We document what was serviced, what parts were used and what we found, so the work is traceable and your DuraFlex system’s coverage isn’t compromised by undocumented repairs. You keep the report and the photos.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Products We Service & Install in Fishtown
We work across the DuraFlex liner types that show up in Fishtown rowhouses, where cracked or undersized original clay tile is the usual reason a liner went in to begin with.
We service and install the DuraFlex SW smooth-wall liner, which is easier to sweep and shows creosote buildup more clearly than a corrugated wall. We work with the DuraFlex Pro double-wall flexible liner where the flue and appliance call for it. We handle DuraFlex insulated liner kits, and insulation is often the part of a liner system that needs attention first. We also work with DuraFlex Reline round liner in an ovalized configuration, which is how a round liner fits into the oblong flues common in older Fishtown masonry.
We don’t claim to stock these products. We source what fits your system and install it to spec.
We Also Service These Brands
DuraFlex is one liner system, and Fishtown chimneys don’t all have one. We also work with HeatShield, the ceramic resurfacing system used to restore liners that don’t need full replacement, and with Gelco caps and covers for the weather protection at the top of the stack. That range means you get an honest recommendation for your chimney rather than a single-brand answer, and one call covers the whole system. If your setup involves a different professional-grade liner brand, tell us what’s installed and we’ll let you know whether it’s a job we take on.
FAQs – DuraFlex Chimney Cleaning Service in Fishtown
No. We are an independent service provider with no affiliation, authorization, sponsorship or certification from DuraFlex. We service, repair and install DuraFlex liner systems because we know the product, not because the manufacturer endorses us. Call (833) 432-4886 for a free estimate.
No. A DuraFlex liner needs different handling, because the flexible stainless wall can be torn or crushed at an offset by an oversized or stiff brush. We use equipment suited to a flexible liner and inspect the offset sections as we go rather than running a standard clay-tile sweep through it. That’s one reason we start with a Level 2 inspection. Call (833) 432-4886 to book one.
Usually because the fasteners have corroded or the cap gasket has failed, and Philadelphia’s freeze-thaw winters speed that up. A loose cap lets water into the annulus and shows up as rust staining on the chimney exterior. The fix is to reseat the cap with a DuraFlex-compatible top plate and stainless fasteners. Call (833) 432-4886 for a free estimate.
Yes. The insulation wrap is part of the liner system, not an accessory, and it’s what keeps flue gases hot and stops condensation forming on the liner’s outer wall. When the wrap degrades near the top, you get condensation and exterior rust staining even if the flue below is sound. We check the top section specifically during every inspection. Call (833) 432-4886 to schedule.
You can’t tell from the firebox alone. Size has to be checked against both the flue and the appliance it serves, because an oversized liner for the flue or an undersized one for the appliance causes uneven creosote buildup in the offset and transition sections. Our Level 2 inspection confirms size with camera evidence and a photo report you can review. Call (833) 432-4886 for a free estimate.
Sometimes, yes. If the liner wall is sound and the problem is a corroded top plate, a failed cap gasket or degraded insulation at the top, we repair the termination and insulation rather than quote a full reline. A torn or crushed section at an offset usually means replacement. We make that call on camera evidence, not on assumption. Call (833) 432-4886 to find out which side of that line your liner is on.
Most DuraFlex cleaning and inspection work in Fishtown falls in the range you’d expect for a lined rowhouse flue, and the price is set per job by a written estimate before any work begins. The estimate is free, and the sweep price is agreed before booking. Call (833) 432-4886 for an exact quote.
Book Your DuraFlex Service in Fishtown, PA
If your Fishtown rowhouse has a DuraFlex liner and you’re not sure whether it needs a sweep, a cap-and-plate repair or nothing at all, we’ll tell you straight after we’ve looked. Call (833) 432-4886 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. One call covers the whole chimney.
Written by the team at Chimney Sweep Fishtown.