Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Fishtown?
Chimney cap and crown work in Fishtown typically runs $185 to $340 for a standard cap installed, and $650 to $2,400 for crown repair or rebuild depending on how much masonry has to come out. A full crown replacement on a two-flue Fishtown rowhouse usually lands between $1,100 and $1,800. Caps are the cheap, fast part of the job; crowns are the part that gets expensive when water has been getting in for a while.
Those are typical ranges, not a quote. The written estimate sets the final price, and we don’t charge for coming out to put it together. If your cap blew off in a storm or your crown is crumbling, call (833) 432-4886. We answer 24/7, fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- A single-flue stainless cap installed: $185-$340 typical
- Multi-flue or custom cap: $340-$700
- Crown repair (crack sealing, patching): $650-$1,200
- Full crown rebuild: $1,100-$2,400
- Crown plus cap booked together saves the second trip and often $100-$250
- We install Gelco, Famco and Copperfield components, not hardware-store caps
Chimney Cap & Crown Cost Breakdown (2026)
Here’s how the numbers break down for the work we do in Fishtown. These are estimated ranges for the Fishtown market in 2026, and they widen or narrow depending on your roof and the condition of the masonry.
| Line item | Typical range | What’s included |
|---|---|---|
| Single-flue stainless cap, installed | $185-$340 | Stock Gelco or Famco cap sized to the flue, mesh spark screen, sealed to the crown |
| Multi-flue cap (two to three flues) | $340-$700 | Wider fabricated cap, custom dimensions, mesh screen, anchored and sealed |
| Custom or oversized cap | $550-$950 | Made-to-measure cap for odd flue arrangements or a crown that’s out of square |
| Copper cap | $700-$1,400 | Copperfield copper, formed to the flue layout, long service life |
| Crown crack repair and sealing | $650-$1,200 | Clearing loose material, sealing cracks, recoating the crown surface |
| Crown rebuild, partial | $1,100-$1,700 | Removing and reforming a section of the crown, new mortar, proper slope |
| Full crown rebuild | $1,400-$2,400 | Removing the whole crown, rebuilding with correct overhang and drip edge, resealing the flue tile joints |
| Crown + cap booked together | Add $150-$340 to crown price | Cap installed while the crown work is fresh, one setup |
What pushes the number up: height. Most Fishtown homes are two- and three-story rowhouses, so the chimney sits well above the roofline and setup takes longer than it would on a ranch house. What pulls it down: catching the crown while it’s still a surface problem. A crown that’s only cracked and hasn’t separated from the flue tile is a repair, not a rebuild. Once the mortar joint between the crown and the flue opens up, water gets behind it and the whole slab starts to move, and that’s when the price jumps into the rebuild column. Pairing the cap with the crown work is the other easy saving, since we’re already up there.
What Affects Chimney Cap & Crown Pricing in Fishtown
Chimney work here isn’t the same as chimney work in the suburbs, and the pricing reflects it. These are the factors that move the estimate most:
- Roofline height and access. A typical Fishtown rowhouse has a flat or low-pitch roof with the chimney stack rising high above it. Getting ladders and equipment up safely on a narrow street takes time, and that time is part of the estimate. Homes closer to the Delaware riverfront and the older blocks around Palmer Street tend to have taller stacks than newer construction.
- Number of flues. A single-flue cap is a stock item. Two or three flues needs a fabricated cap sized to the exact layout, which costs more. If the flues are spaced unevenly, we’re measuring and ordering rather than pulling from the shelf.
- Crown condition. Hairline cracks are a coating job. A crown that’s separated from the flue, has missing chunks, or sits flat with no slope needs rebuilding. The price difference between those two situations is the single biggest variable on this page.
- Masonry damage beneath the crown. If the crown has been failing for a while, the top courses of brick may be spalling or soft. That’s brickwork on top of crownwork, and the estimate grows accordingly. We check this before quoting, so it doesn’t turn into a surprise mid-job.
- Material choice. Standard stainless and steel caps from Gelco and Famco sit at the low end. Copper from Copperfield costs more up front and holds up longer. We name the brand on the estimate so you can look it up yourself.
- Whether the cap has to be custom-fabricated. Odd flue shapes, a partially collapsed crown, or a chimney that’s out of square means a made-to-measure cap. That’s a different line item from a stock install.
One more local factor worth naming: Fishtown’s older housing stock was built long before modern flue standards, and a fair number of homes here have chimney crowns that were poured flat, with no slope to shed water. A flat crown holds water on top of it, and that water finds every crack. When we rebuild one, we build in the slope and the overhang it should have had. That’s part of why a rebuild costs what it does, and it’s why the new crown outlasts the old one by a wide margin.
What a Chimney Cap Actually Does
A cap is the lid on top of your flue. It keeps rain, snow, birds, squirrels and leaves out of the chimney while letting smoke and gases escape through the mesh screen. Without one, water runs straight down the flue, and in a city with as much rain as Philadelphia gets, that adds up fast. A cap also stops downdrafts, which is the reason some fireplaces smoke into the room instead of up the chimney. If you’ve ever had smoke roll out of the firebox on a windy day, a properly sized cap is often the fix.
We stock and install Gelco and Famco caps, and Copperfield copper when the homeowner wants it. These are the brands chimney professionals specify, sized to the actual flue rather than a one-size-fits-all box from a hardware store. A cap that’s the wrong size rattles in the wind and doesn’t seal, and a loose cap lets in exactly what it was supposed to keep out. If your chimney cap & crown needs attention, the sizing and the seal matter as much as the material.
What a Crown Actually Does
The crown is the concrete or mortar slab at the very top of the chimney, the part the cap sits on. Its job is simple: shed water away from the brick below. A well-built crown slopes away from the flue on all sides and overhangs the chimney walls slightly, so runoff drips clear instead of running down the masonry. When the crown cracks or fails, water gets into the brick, and freeze-thaw cycles in a Pennsylvania winter do the rest. Brick spalls, mortar joints crumble, and what started as a $650 repair becomes a rebuild.
That’s why we treat the crown as the first line of defense, not an afterthought. On a full rebuild, we form the crown with the correct slope and drip edge, and we seal the joint where the flue tile meets the crown. If the crown isn’t repairable, the rebuild is what protects everything below it. This is also the point where a lot of general handymen stop and hand the job off. We don’t. From sweep to rebuild, the whole chimney system stays with one company.
How Does Water Damage Drive the Price Up Over Time?
Water does more damage to a chimney than fire does, and it does it slowly enough that most homeowners don’t notice until the price has already climbed. A cracked crown lets water in. The water freezes, expands, and widens the crack. Repeat that over a few winters and the crown separates from the flue tile, the top course of brick starts to spall, and eventually the chimney needs work that goes well beyond the cap and crown line items above. A crown repair caught in the first year of cracking stays a repair. The same crown caught three winters later is a rebuild plus brickwork.
If the crown has been failing for years, water may already have found its way down to the flue liner. That’s a separate problem with its own cost, and it’s why we look at the whole chimney when we’re up there. A damaged liner is a safety issue, not just a repair bill. Our technicians have up to 13 years of experience reading that kind of damage, and we’ll tell you plainly what needs fixing now and what can wait. When the liner itself is compromised, we work with HeatShield ceramic resurfacing for restoration or a DuraFlex flexible liner for retrofit, depending on which fits the flue.
Safety matters here: chimney crowns and caps sit at the top of a stack above a multi-story rowhouse. Ladder work at that height is dangerous, and so is working near an open flue. We recommend a trained professional for any crown or cap work, and we don’t publish step-by-step instructions for doing it yourself. The view from up there is worse than it looks from the sidewalk.
How to Save on Chimney Cap & Crown in Fishtown
There’s no magic discount, but there are real ways to keep the bill down:
- Fix the crown while it’s still a crack. A $650-$1,200 repair now beats a $1,400-$2,400 rebuild later, and that’s before any brickwork.
- Book the cap with the crown. If we’re already on the roof for crown work, adding the cap avoids a second setup and typically saves $100-$250.
- Get the annual sweep. A sweep is when we catch crown and cap problems early, before they’ve had a winter to get worse. It’s the cheapest inspection you’ll ever get.
- Ask what material the cap is. A stainless or copper cap costs more than a painted steel one up front and outlasts it. Knowing the brand lets you check the material yourself.
- Get the estimate in writing before anyone climbs. Free, per-job estimates mean you know the number before a ladder goes up.
We give free estimates, and the written estimate sets the final price. Call (833) 432-4886 to set one up. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Repair or Replace: Which Makes More Sense for a Fishtown Chimney?
Repair usually wins if the crown is cracked but still solid and attached to the flue tile. Replace when the crown has separated, is crumbling across a large area, or sits flat with no slope. A rebuild costs roughly twice a repair, but it resets the clock on the crown for decades, which a patch doesn’t. If the masonry below the crown is already spalling, repairing the crown alone won’t stop the water problem, so a rebuild plus any needed brickwork is the honest answer. We’ll tell you which category your chimney falls into instead of quoting the bigger job by default.
FAQs – Chimney Cap & Crown Cost
How much does a chimney cap cost in Fishtown?
A standard single-flue chimney cap installed in Fishtown typically costs $185 to $340. Multi-flue caps run $340 to $700, and a custom or copper cap runs $700 to $1,400. The cap is sized to your flue and sealed to the crown, and we install Gelco, Famco and Copperfield components so you know what you’re getting. Call (833) 432-4886 for an exact quote; estimates are free.
How much does chimney crown repair cost in Fishtown?
Crown repair in Fishtown typically costs $650 to $1,200, and a full crown rebuild runs $1,400 to $2,400. The difference comes down to whether the crown is cracked but attached or has separated and started to fail. We check for brick damage beneath the crown before quoting, so the number holds. Call (833) 432-4886 to get a written estimate.
Is it cheaper to repair or replace a chimney crown?
Repair is cheaper up front at roughly half the cost of a rebuild, but only when the crown is still attached and the damage is surface-level. A rebuild costs more and lasts far longer, so it’s the better value when the crown has already separated or gone flat. We’ll tell you which makes sense for your chimney rather than pushing the bigger job. Call (833) 432-4886 for a free assessment.
Can you install a chimney cap and repair the crown the same day?
Often, yes. Cap installation and crown repair can usually be done in a single visit, and booking them together typically saves $100 to $250 in setup. A full crown rebuild is a bigger job and depends on the masonry condition and access. Call (833) 432-4886 to schedule; we answer 24/7.
Do I need a permit for chimney crown work in Fishtown?
Permit requirements vary, and some crown repairs don’t need one while a structural rebuild might. We can’t give you a permit number or rule without checking with the city, so the honest answer is to ask Philadelphia’s building department about your specific address. What we can do is walk you through what the work involves and put a written estimate together. Call (833) 432-4886 to start.
Why Material Choice Shows Up in the Price
Two caps can look identical from the sidewalk and differ wildly in what they cost and how long they last. We name the materials we use because it’s the only way you can judge the price. A Gelco or Famco stainless cap, a Copperfield copper cap, a DuraFlex flexible liner for a retrofitted flue, HeatShield ceramic resurfacing for a worn liner, an Olympia Chimney component where the job calls for one: these are professional-grade parts, not hardware-store substitutes. When you look them up, you’ll see what the difference in price is buying. That transparency is part of what makes the estimate worth reading.
If you’ve got a wood-burning fireplace you use regularly, the cap and crown are the parts that keep it working. A $185-$340 cap and a crown kept in repair protect everything below them. One call covers the whole chimney, from the sweep to the rebuild, and you won’t be handed off to a second contractor halfway through. For a full look at this side of the work, see chimney cap & crown, and for the broader service, Chimney Sweep Fishtown.
Get a Free Estimate in Fishtown
Chimney cap and crown pricing in Fishtown comes down to a handful of things: how many flues you have, whether the crown is cracked or separated, and whether there’s brick damage beneath it. A standard cap runs $185 to $340, crown repair runs $650 to $1,200, and a full rebuild runs $1,400 to $2,400. We’ll come out, look at the whole chimney, and put a written estimate together at no charge. Call (833) 432-4886 to book it. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Fishtown market as of 2026. Chimney Sweep Fishtown offers free estimates – call (833) 432-4886.
Written by the team at Chimney Sweep Fishtown.
What Our Customers Say
"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Salma Haddad"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Lucia Guzman"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Allison Norris